How to Clean Upholstery With OxiClean? 7 Practical Steps

How to Clean Upholstery With OxiClean? 7 Practical Steps

Got a stain on your couch? You can follow this easy guide to clean upholstery with OxiClean.

In comparison to replacing it with a new one, cleaning your upholstered furniture is more affordable. A steam rug cleaner with furniture-cleaning attachments should be rented if you don’t already have one.

Additionally, using OxiClean to clean the upholstery virtually ensures that it will be clean. Upholstery is just one of the many items that OxiClean has successfully cleaned.

We’ll go over some useful instructions for using OxiClean to clean upholstery in this article. You can easily use OxiClean to keep your couch looking clean and fresh by following the easy steps below.

How to Clean Upholstery With OxiClean?

What You’ll Need:

  • 1 cup water
  • Oxi-Clean scoop (to the “B” line)
  • Funnel
  • Steam Cleaner
  • Spray bottle

Cleaning upholstery fabrics needs some tips, and it is important to clean upholstery fabrics before using them for the first time, but don’t worry, we have provided you with a Upholstery Fabric Cleaning Guide. It can tell you how to clean different types of upholstery fabrics.

How to Clean Upholstery With OxiClean? 7 Practical Steps

Steps to Clean Upholstery With OxiClean

  1. Vacuum the furniture first. Prior to beginning the OxiClean upholstery cleaning process, remove any sand, dirt, or other loose materials. If you don’t, the loose dirt will just get pushed deeper into the upholstery, which will make cleaning more challenging.
  2. A steam cleaner with upholstery attachments should be purchased. Usually, you can find them at your local grocery store or Amazon. Additionally, you can purchase a canister of OxiClean at these locations.
  3. Buy a bottle of the pre-mixed OxiClean Laundry Stain Remover Spray if your upholstery has stains on it.
  4. As directed, attach the upholstery cleaning attachments to the steam cleaner. Since they should be cleaned differently than the furniture, remove any cushions from the couch or chair.
  5. To access the backside of the cleaning unit, move the furniture away from the wall. If there are any stains that need to be removed, spray OxiClean Laundry Stain Remover solution on the stain and work it in with a damp cloth.
  6. Before using the steam cleaner to clean, give the OxiClean Laundry Stain Remover treatment about 10 to 15 minutes to sit.
  7. Add some OxiClean to the warm water in the steam cleaner’s water reservoir. A long spoon or stick can be used to stir the OxiClean until it dissolves in the water.
  8. Attach the water-holding unit to the steam cleaner, then begin using the upholstery attachments to clean the upholstery. Suck up as much water as you can while cleaning. You might need to revisit any areas that were still dirty.
  9. If possible, put clean water in the holding tank and go over the upholstery one last time to get any OxiClean that might be embedded in the fabric out.
  10. Ensure that the upholstery dries completely. To ensure that any cushions are completely dry, move them to the side. It is best to avoid placing them directly on furniture or the underside because this will make them take longer to dry and may cause you to have to complete additional tasks.
  11. When the upholstery on your furniture has dried, you’ll be amazed at how beautiful it looks and how well OxiClean did the job.

Related: Can You Mix Hydrogen Peroxide and Laundry Detergent?

How to Clean Upholstery With OxiClean? 7 Practical Steps

How to Use OxiClean Around the House?

Besides using OxiClean to clean upholstery, you can use this product to clean other things around the house.

Cleaning Carpet Spots and Stains With OxiClean

One scoop of Oxiclean to two cups of water, mixed in a spray bottle, can be used to spot-clean your carpet in the same ratios. Before using this homemade carpet cleaning solution on the stain, I would advise testing it in a hidden area if you are worried about changing the color of your carpet.

Similar to cleaning upholstery, you should only use as much water to saturate the stained area as necessary when cleaning the carpet. Do not use more water.

After letting the solution sit on the carpet for one to five minutes, blot it with a dry white cloth. Re-blot dry after rinsing the solution off with water. You should vacuum the carpet after it has dried completely.

OxiClean White Revive Review: Impressive Cleaning Power

Cleaning Hard Surfaces With OxiClean

By combining 2-4 scoops of the powder with a gallon of warm water, you can also make your own all-purpose cleaner.

Then, you can use this cleaning solution to clean and remove stains from a variety of surfaces throughout your house, including plastics, trash cans, linoleum, and more. After cleaning, rinse with fresh water to get rid of any leftovers.

What is the Thing to Clean Upholstery With?

To get the best results when cleaning upholstery, vacuum it first to get rid of any surface dirt and debris. Next, use a clean cloth and a small amount of mild detergent or upholstery cleaner to spot-treat specific stains. Blot the stained area until the stain is removed.

You might need to use a steam cleaner to remove more difficult stains. Using a damp cloth, blot the area after the stain has been eliminated to remove any remaining detergent or upholstery cleaner. Before using the upholstery, give the area plenty of time to dry completely.

Finally, fluff the area back up with a soft-bristle brush to make sure all the fibers are standing straight.

How Do You Get Tough Stains Out of Upholstery?

The secret to removing tough stains from upholstery is to move quickly. It’s always best to treat stains as soon as you notice them because once they’ve set in, they can be very challenging to remove.

Using a spot cleaner is one of the most common ways to remove stubborn stains from upholstery. Spot cleaners are cleaners that are specially formulated for particular materials, surfaces, and stains.

How to Clean Upholstery With OxiClean? 7 Practical Steps

Check the cleaning code for your upholstery fabric and the manufacturer’s instructions before using a spot cleaner to ensure that it is safe to use on it.

If a spot cleaner is not available, you can also try using a detergent solution. 1 cup of warm water and 1 teaspoon of a mild liquid detergent should be combined. Working from the outside of the stain toward the center, dip a white cloth into the solution and dab it onto the stain.

Until the stain is gone, blot it with a dry cloth and repeat. If the stain persists, you can try combining 1 part white vinegar and 2 parts warm water. As soon as the stain appears, dab it with a white cloth dipped in the mixture. Making a paste of baking soda and water and applying it to the stain gently is an additional option.

After 30 minutes, let the paste sit on the stain before removing it with a vacuum or brush.

Finally, you can try using a commercial cleaner if the stain continues to resist removal. Prior to using any harsh cleaning agents on the upholstery, always make sure to test a hidden area of the fabric to protect it.

Although it can be difficult, removing stains from upholstery is not impossible. Here are some guides you can follow to clean different stains from upholstery:

Conclusion: Clean Upholstery With OxiClean

In order to help you slightly prolong the life of your couch, I hope this article on how to clean upholstery with Oxiclean is helpful.

Spray the area with the OxiClean spot treatment solution and work it in with a damp cloth if any spots need to be treated first.


Is OxiClean Good on Upholstery Seats?

Even outside of the laundry room and on difficult upholstery stains, OxiClean removes stains effectively! OxiClean works best on upholstery stains like juice, red wine, coffee, or tea. Therefore, let’s deal with the sofa’s grape juice stain.

Is OxiClean Safe on Fabric?

Learn how to spot-sanitize a fabric couch with OxiClean™ Laundry & Home Sanitizer, our 3-in-1 formula that removes germs, stains & odors, is gentle on fabrics and is color safe.

How Long to Leave OxiClean on Fabric?

Spray until saturated and directly onto the spot or stain. Let stand for 5 minutes or up to a week depending on the severity of the stain. Avoid letting stand for more than five minutes on fabrics that are prone to color fading.

What Fabrics Can You Not Use OxiClean On?

OxiClean’s manufacturer suggests that it should not be used on the following fabrics: wool, wool blends, silk, silk blends, leather, or on fabrics labeled dry clean only.

Why Not Use OxiClean?

Harmful if swallowed. includes both sodium carbonate and sodium percarbonate. Avoid prolonged skin contact and eye or solution contact (wear gloves). 

Don't forget to share this post.

Similar Posts

Leave a Reply

Your email address will not be published.