How to Dye Velvet Fabric? Velvet Dyeing Instructions

How to Dye Velvet Fabric? Velvet Dyeing Instructions

We’ll examine the various velvet dyes in this article. We’ll also look at the velvet varieties that can be dyed.

One of the most opulent fabrics that can be dyed and combined with anything is velvet.  Most people wonder Can you dye velvet fabric? This question was prompted by the fabric’s special characteristics. For velvet made of organic materials like cotton, the dyeing procedure will be simple. It’s also possible to dye nylon-based synthetic velvet.

In order to dispel your confusion, we will discuss whether or not velvet can be dyed in this article. And here is How to Paint Velvet Fabric and how to care for the velvet fabric.


How to Dye Velvet Fabric?

  1. To get grease and dirt off your velvet, wash it. The fabric must be wet in order to be dyed, so avoid drying it.
  2. Put the stock pot on the stovetop with the heat set to medium-high and fill it with hot water. Make sure there is sufficient water and space for the fabric to move around without restriction while being dyed.
  3. Add the acid dye powder to the dye pot after dissolving it in 1 cup of hot water. Observe the dye usage recommendations provided by the manufacturer.
  4. Include the pot with the wet velvet fabric. To evenly distribute the dye, stir the fabric for a few minutes.
  5. Bring the water’s temperature up to 185 degrees Fahrenheit.
  6. The dye pot needs citric acid or white vinegar. For every pound of fabric, use 1 tablespoon of citric acid or 1/4 cup of vinegar.
  7. Depending on how intense you want the colors to be, keep the temperature constant for 30 to 60 minutes while stirring the dye pot frequently.
  8. Rinse the velvet with warm water after removing it from the pot. Rinse in cool water after washing using the standard wash cycle.

How to Dye Velvet Dresses?

How to Dye Velvet Fabric? Velvet Dyeing Instructions

The process of hand- or machine-dying dresses and other clothing is available. Before trying to dye your velvet, check the care label of your garment to learn how many fibers are in it. Make sure you choose the appropriate dye for the fabric.

In this instance, we’ll assume that the velvet dress contains a lot of nylon. In order to use an acid dye at high heat, the following steps will be covered.

What You Will Need

  • Acid dye
  • Large cooking pot
  • Rubber gloves
  • Laundry tongs
  • Thermometer
  • Kitchen scales
  • Vinegar or citric acid


  1. If you need to know how much weight your dress has, check the acid dye packaging. You may need to measure the amount of acid you use when using some dyes. Typically, depending on the acid you use, it ranges from 1 tablespoon to 1/4 cup per pound of fabric.
  2. By washing it in accordance with the care label’s instructions, make sure the velvet dress is completely clean. You can either do this by hand or in a washing machine. After the wash cycle is finished, don’t dry the dress. For the following steps, it must be wet.
  3. On your stove, heat up a sizable cooking pot of water to a rolling boil. Set the heat to medium-low instead. The pot must be large enough to completely enclose your dress and provide space for it to move around inside the pot.
  4. For information on how much acid dye to add to the boiling water, refer to the instructions on the package. It might be necessary to combine some dye with 1 cup of hot water before adding it to your cooking pot. Use your laundry tongs to stir it to ensure that the dye is completely dissolved.
  5. Put your wet velvet dress in the cooking pot and use your laundry tongs to push it under the water. Make sure the item is completely covered in dye by giving it a spin. To protect your hands during this stage, you must put on your rubber gloves. The color of your hands shouldn’t match the color of your clothing, even though it might look great!
  6. When the dress is added, you’ll notice that the water slightly cools. Reheat the water to a temperature of about 185°F. Mix it up with your acid. Verify that the acid is being used in the right quantity on the dye packaging.
  7. For 30 to 60 minutes, maintain the water at a constant 185°F. The color will get darker the longer you leave the item out. You should aim for no more than 30 minutes for a delicate, light shade. As the fabric is being dyed, don’t forget to stir it occasionally.
  8. Remove the velvet gown from the cooking pot once the allotted time has passed. Because the dress will be warm, use your laundry tongs and rubber gloves. Rinse the item in warm water until the water is clear.
  9. In the regular, cool cycle of your washing machine, wash your dress. Reshape the clothing while it’s still damp, and fluff the nap with a soft brush. Then, let it air dry.

How to Dye Velvet Furniture?

How to Dye Velvet Fabric? Velvet Dyeing Instructions

When dying the velvet covers on your sofa or chairs, this technique is ideal. Make sure the fabric dye you select is appropriate for your velvet furniture. When you sit on your furniture, you want to be sure it won’t transfer to your clothes.

What You Will Need

  • Dye suitable for velvet upholstery
  • Masking tape
  • Plastic drop cloths
  • 2 Sponges
  • Bucket of warm water
  • Soft upholstery brush


  1. Protect the furniture pieces you don’t want to dye first. Drop cloths made of plastic should be used to completely cover the wooden parts of the arms and legs. Use masking tape to secure the plastic. For this, duct tape could also be used, but be careful to only adhere to the plastic sheeting and not the wood or the chair covers! Avoid damaging the velvet or removing the varnish from your wooden surfaces.
  2. Give your couch or chair a quick cleaning with the sponge. Make sure to liberally spray water on all of the velvet areas. To make the surface feel damp, you only need a small amount of water.
  3. Check the directions on the dye packaging, then combine the dye as instructed. Next, dye the velvet by spreading it with a dry sponge. Work in a circle moving from one chair or sofa side to the other. The circular motion should be continued until all of the fabric is dyed.
  4. A minimum of 24 hours should be given for your furniture to dry. You might discover the nap has been flattened by the dye once it has dried. If this is the case, fluff the velvet fibers once more using a soft upholstery brush. As an alternative, you could lightly sponge some warm water over the area and let it air dry.

How to Dye Velvet Curtains and Cushion Covers?

How to Dye Velvet Fabric? Velvet Dyeing Instructions

There is a connection between clothing and curtains and cushion covers. Additionally, you can hand-dye them or wash them in a washing machine. This time, we’ll cover dyeing a rayon velvet with Procion MX dye in a washing machine, similar to how we looked at acid dyes in the previous example.

What You Will Need

  • Procion MX dye
  • Washing machine
  • Kitchen scales
  • Soda ash


  1. Weigh your velvet before beginning the dyeing process, just as you would with the acid dye technique. To make it easier to remember later, write down the weight and keep it nearby.
  2. Use a soft brush to remove any dirt from the curtain or cushion covers to ensure they are clean. Wash the items on a regular machine setting if any stains or marks are still present. Don’t dry them; instead, take them out of the machine and shake them out.
  3. Read the directions on the Procion dye’s packaging. As instructed by the manufacturer, dissolve the dye.
  4. Re-insert the wet velvet into the machine. For information regarding machine settings and when to add the dye, consult the dye manufacturer’s instructions. Normally, it’s a cool environment. Mix in 2 tablespoons of soda ash and the dye that has been dissolved.
  5. Wash the velvet as usual after dying it to get rid of any remaining dye. Additionally, this will aid in cleaning out your machine. Once the cycle is finished, take the items out and let them air dry. Put your machine through one more wash cycle while you wait to make sure all the dye has been removed.

Fabric dyeing is the process of coloring textiles, such as cotton, silk, wool, or synthetic fabrics, using different types of dyes. Dyes can be applied to the fabric using various techniques, including immersion, dip-dyeing, tie-dyeing, and printing. Here, we have explored some fabrics that you can dye:

What Dyes Work on Velvet Fabric?


Are you looking for Which type of dye you use on velvet? The options for dying velvet are numerous. Velvet is available in both natural and artificial materials, so there are many choices.

Now let’s look at the various dyes that are currently available. You can then decide which dye will result in the best results using this information.

  1. Natural Dye: Natural fiber textiles can be dyed with this product, which is a natural dye. If the majority of your velvet is made of natural fibers, like cotton, then this dye might work well. The majority of these dyes are mineral-based. In addition to nuts, they can also be made from berries, lichens, roots, and wood. Onions, nettles, and turmeric can all be used to make natural dyes.
  2. Acid Dye: With protein fibers and synthetic polymers, these concentrated hot water dyes work well. You must use silk and wool, two materials derived from animals, in the creation of your velvet. or artificial materials like nylon. Despite being called “acid dyes,” they have a very low acid content. It is typically either vinegar or citric acid.
  3. Procion MX: All velvets can be dyed with Procion MX, a dye that is adaptable. Cold water and a concentrated solution of it can be used to dye cellulose fibers. This holds true for cotton and viscose. You might be more accustomed to viscose than rayon. Procion MX and acid combined with hot water can be used to dye the wool. Better yet, you can dye nylon with a hot water and acid mixture.
  4. Bleach: Velvet can be bleached to change color, but fiber content must be taken into consideration. With cotton, this procedure performs best. Bleach can damage velvet made of synthetic materials or synthetic blends. Amazing effects can be produced by bleaching cotton velvet. Bleaching cotton velvet can produce an unusual outcome.
  5. Disperse Dye: If you’re using velvet that contains polyester, you’ll need a disperse dye. Polyester is resistant to moisture and doesn’t take in colors made from water. They are divided by the intense heat that is used to spread the fabric’s dye. In between them, where they separate, the dye seeps in. This enables the color to penetrate the fabric.

Final Thoughts: Dyeing Velvet Fabric

People want to dye velvet to make it look more attractive. The good news is that velvet can be dyed depending on the kind of fabric. If your velvet is made of cotton or another material similar to it, you can either use natural dyes or regular dyes.

Prior to beginning a dyeing project, always determine the velvet’s fiber content. Avoid dyeing any polyester-containing velvet items for the best results and the least hassle.


How Hard Is It to Dye Velvet

Velvet is one of the simplest materials to dye because its fibers take in colors very well. Due to their optimal nap thickness, velvet furniture can be dyed without removing the fabric. In less than 24 hours, a new look for your velvet sofa can be achieved using warm water, a sponge, and dye.

What Dye is Best for Velvet?

Depending on whether your velvet is made of cotton or another similar material, you can either use natural dyes or regular dyes. Acid dyeing is recommended for velvet made from synthetic fibers. The Procion MX dye can be helpful since you might not be able to determine the kind of velvet.

What Fabric is Hardest to Dye?

With all of the dyes, wool consistently produced the most vibrant colors. It was also fairly simple to dye nylon, cotton, and acetate. Polyester was the most difficult fabric to dye.

Don't forget to share this post.

Similar Posts

Leave a Reply

Your email address will not be published.