How to Iron Denim Without Damage? Tips & Tricks

In order to ensure that jeans are treated well and to determine whether ironing jeans actually cause damage or not, we will go over exactly how to iron jeans properly.

You run the risk of your jacket or jeans getting wrinkled if you leave them rumpled on the ground or in the laundry basket. If this occurs, you need not worry because there are several different things you can do to remove the wrinkles.

You only need an ironing board or other flat surface, and a good iron with a full water tank. Here is how to iron denim jeans:

1. Turn the jeans inside out to prevent discoloring.
2. If you have a conventional iron, spread the jeans out on the ironing board.
3. Start pressing the front and back pockets.
4. Laying your jeans flat, iron the waistband and smooth out any other details, such as buttonholes and pleats.
5. Place the front of the legs parallel to the ironing board and press the iron firmly until all creases and wrinkles are gone.
6. On the back of your jeans, repeat this procedure.

Still, if you’re pro-iron, here’s how to use the household staple to get your jeans to perfection.

How to Iron Denim?

Here are steps to iron denim:

Turn Pockets Inside Out

Fill the iron’s water tank first. You will require steam. During the ironing process, pockets may go unnoticed, and the resulting wrinkled and balled-up pockets result in a style that you probably don’t like.

Before you iron your jeans, turn the pockets inside out and gently press the iron until they’re smooth.

Gently Press the Waistband

The strongest part of the garment is the waistband, so to de-wrinkle it, gently press it into one spot for a short period of time before moving along the waistband. In order to avoid creases in the fly or zipper while ironing, leave the fly unbuttoned.

To really fit into those small spaces, try pulling the waistband up as well. Learn all these tips by watching the video above from Phillips.

Line Up the Seams

One by one line up the seams (inseam/outseam) on the legs of your jeans. Make sure the seams on your jeans match up perfectly and that they are evenly spaced.

To eliminate creases on the thigh, knee, and calf regions of the denim jeans, slide the iron up and down the leg of the garment. Continue until the legs of your jeans are completely wrinkle-free.

Flip the Jeans Over

Once you are finished on the front side of the jeans, check to see if you need to iron the backside as well. The butt area, the area behind the knee, and the bottom hem of the jeans are all wrinkle-prone areas on the back of your jeans.

To iron the backside of your jeans simply repeat the steps above.

How to Iron Jeans With Crease?

The first step in ironing creased jeans is to ensure that they are damp. If you dry your jeans in the dryer, you can take them out before they are totally dry, or if they are already dry, you can mist them with a spray bottle to make them damp.

While the jeans are damp, you’ll want to fold the jeans to create the crease. A crease down the middle of the leg is what you want. The sides, seams, and cuffs should all line up when you fold the jeans. This will help the creases of your jeans be as even as possible.

Select the high heat setting on the iron. The fact that the jeans are wet means that the heat shouldn’t harm them in any way. Use pressure and iron over the creases that you’ve created to set the crease.

Additionally, you can starch the jeans by misting starch over the creases and ironing them to give them a permanent crease. Continue to wash, iron, and starch them to keep the crease with subsequent wear.

Tips for Ironing Denim Jeans

Use these tips to iron jeans the best way possible.

• Spray some moisture with a spray bottle on creases and wrinkles that are particularly deep.
• Turn your jeans inside out and iron from the backside to preserve the outer surface of the garment.
• When ironing your jeans, keep the button and fly zipper open.
• When ironing your jeans, use as much steam as possible.

Should You Iron Jeans?

Many people have different opinions when it comes to this question. Jeans may be ironed without a doubt. However, you should proceed with caution and only use the steam function, or the low heat setting, on your iron if you can.

Remember that cotton fabric, which is what is used to make jeans, has a tendency to shrink in hot environments. Make sure you don’t forget to adjust the settings on the iron because the denim’s fibers react differently than your shirts or blouses.

In spite of this, your jeans are more likely to shrink in the washing machine or the dryer than they are in the ironing board. Consider washing, drying, and ironing your jeans entirely at lower temperatures to keep them in the best possible condition.

Ironing jeans is not absolutely necessary because they tend to retain their shape much better than other types of clothing. The fibers will naturally realign and de-wrinkle themselves once they are dry as long as they are folded and stored in a tidy manner.

Whatever you decide, it’s a relief to know that ironing creased jeans won’t harm them permanently.

Conclusions: Iron Denim Jeans

Although ironing your jeans isn’t something that is done often, they can be ironed if necessary to remove wrinkles. You shouldn’t shrink or damage your jeans as long as you iron them correctly and at a low temperature.

To iron your denim clothing, adhere to the instructions provided. Set your iron to the highest temperature recommended on the denim label, then go over the entire surface of your fabric with it until all wrinkles are gone. If your denim is jeans and very wrinkled, it might take a little while to do this.

FAQs