How to Remove Mold from Fabric Shower Curtain? 4 Methods

We’ll cover cleaning your shower curtain to prevent mold growth in your bathroom as well as how to get mold out of its fibers in this guide.

While taking a shower in your most exposed state, a fabric shower curtain prevents water from entering your bathroom and gives you a feeling of privacy. But as everyone is aware, mold grows wherever there is moisture.

So how to remove mold from fabric shower curtain? Mold removers that are natural and efficient include hydrogen peroxide and baking soda, which are both common household items. To get rid of mold on your shower curtain, use these along with a little elbow grease.

Read this blog and you can learn how to remove mold from fabric shower curtain with easy methods.

How to Remove Mold from Fabric Shower Curtain?

Mold and mildew give off musty odors, can trigger allergies, and are generally disgusting to have around your house. As we offer training seminars on proper cleaning techniques, our seasoned cleaners at Luce Home have had plenty of experience cleaning out mold-infested areas in homes.

Here are some tried-and-true methods that our cleaners use to get rid of mold on fabrics that you can use to remove the mold from your bathroom curtains. For a wash cycle that runs without interruption, don’t forget to remove the shower curtain rings before you begin cleaning.

Baking Soda and Vinegar

1. Your fabric shower curtain can be washed in a washing machine. To assist the cleansing process, add two terry-cloth towels to the load. As the tub fills, turn the dial to the gentle position, raise the water’s temperature to warm, and add your detergent.
2. Baking soda should be added in the amount of ½ cup during the wash cycle. Pay attention to the cycles, and when the rinse action starts, measure out ½ cup of plain white vinegar and pour it into the tub.
3. When the cycle is finished, shake the curtain and look behind it for any mold that might still be there. Make a paste out of baking soda and water, apply it to any mold that is still present, and then repeat the previous two steps. If possible, hang the shower curtain in the sun or in your shower to dry. When the material is completely dry, iron it if necessary.

Oxygen Bleach

1. In order to stop the spread of mold spores, take down the fabric curtain and fold it inward. If there is mold growing around the curtain rings, take them off as well. As much mold as you can remove by going outside, laying the curtain on the ground, and brushing it off.
2. 2 quarts of hot water ought to be put in the tub. The shower curtain and 4 tablespoons of non-chlorine bleach should be added. Give it an hour to soak. To eliminate any mold spores they may have picked up, place the curtain rings and brush inside the tub.
3. Fold the tub curtain after removing it, then use a gentle press to remove the bleach-infused water. Shake, then rinse in a tub of warm, fresh water. To get the water off, remove and fold once more. Because the fabric will wrinkle, avoid twisting when ringing it out. If possible, hang it outside in the sun or bring it back to your shower to dry there.

Hydrogen Peroxide and Borax

1. Fold the curtain inward and pull it back. Bring it outside and lay it flat with the mold facing up. Combine 2 cups of hydrogen peroxide and 1 cup of water in a spray bottle. Allow the curtain to sit for 30 minutes after liberally spraying.
2. To get the mold off the fabric, scrub it with a soft brush. Work carefully to avoid tearing the fabric. Check for any remaining mold after rinsing in warm water.
3. If the stain doesn’t go away, mix equal parts water and borax to make a paste. Rub it gently with the brush after applying it to the mold. To eliminate mold spores, wash the brush in hot water and then rinse and let it dry.

Lemon and Salt

1. Slice a lemon in half, and squeeze the juice onto the curtain. When the mixture resembles a paste, add salt.
2. Into the stains, rub the paste. Give it 30 minutes to rest. The mold is removed by the lemon’s acid.
3. With a wet cloth, remove the paste. If the stains still exist, repeat. Warm water, a gentle cycle, and laundry detergent are used to wash the curtain. It should be dried on a hook in the sunlight.

How to Clean Fabric Shower Curtain Inside?

If it’s not practical to clean your shower curtain outside, you can still remove mold from it by treating it inside. To be safe, use the same cleaning supplies from above and make sure there is plenty of ventilation.

• In the tub, spread out the removed shower curtain.
• On the shower curtain, mist a solution of two parts hydrogen peroxide and one part water.
• For five to ten minutes, let the hydrogen peroxide sit. Rinse thoroughly.
• Scrub away the mold using a baking soda paste. As necessary, rinse and repeat. You should pay attention to the creases along the folds and seams of your shower curtain since it isn’t laying flat.
• Repeat on the other side of the shower curtain.
• Shower curtains should be dried by hanging them from curtain rods.

What Causes Molds and Mildews in Fabric Shower Curtain?

Anywhere there is moisture and organic material, mold can grow. Unfortunately for your shower curtains, the fiber material meets both criteria, especially if they are made of cotton or another natural fiber.

In essence, a wet curtain provides the ideal environment for mold and mildew spores to flourish, and the bathroom’s high humidity ensures that mold spreads rapidly. It is best to take immediate action if you have other areas of your home where mold has previously invaded because there is a good chance that the spores have spread there.

How to Prevent Mold on the Fabric Shower Curtain?

Changing the circumstances that encourage mold growth is the best way to prevent mold. This entails removing moisture from the air, maintaining clean shower curtains, avoiding leaks, and getting rid of standing water. If you incorporate these mold prevention measures into your cleaning routine, you might never need to deal with mold again.

• When taking a shower or bath, turn on the exhaust vent, and keep it running for at least 30 minutes after you are finished.
• The most effective way to lessen moisture in your bathroom is to run the exhaust fan.
• To lessen the amount of moisture in the space, squeegee the walls of your tub or shower right away. Moisture is immediately reduced, and it only takes a minute.
• As soon as you notice a leak, fix it. Mold can quickly grow and spread when there is constant leakage and standing water.
• Wash your towels and bath mats frequently. Don’t allow them to slouch in the restroom. Mold can grow easily on dirty, damp fabrics, which can also give off bad odors.
• When not in use, remove loofahs, sponges, and bath products from the shower. Mold has fewer places to hide and grow in your shower if it is clean.

Final Words: Remove Mold from Fabric Shower Curtain

It looks bad and is unpleasant to have mold on a shower curtain. When you have guests, it can be embarrassing because it makes your bathroom appear unclean and unwelcoming. However, the threat posed by mold is greater. Mold will grow and spread if it is not removed, causing respiratory illnesses and exacerbating asthma and allergies.

When your fabric shower curtain is mold-free, hang it with a liner. Inspect fabric liners that are mold-resistant.

FAQs